Tag Archive | Reducation

REDucation Offical Red Cam Training at London Met Film School

Saturday 28th and Sunday 29th March saw the REDucation training workshop arrive in London at the Met Film School in Ealing Studios West London. I’ve used a Red One but have yet to land a shoot where I can really get my hands on the newer cameras and system. When I was offered the chance to attend the course by Kit Plus magazine I naturally jumped at the opportunity. The course is run over two days in the UK and so there is a lot of information to pack into the 18 hours of guided tuition, lead by John Marchant and Steve Johnson and Dado Valentic on the post and workflow side. Sam Measure was present from RED UK and assisted the groups in setting up of cameras and answering technical questions. Jon Theobald and several Met Film School graduates were also assisting the groups once we got started with the cameras.

wpid-20150328_175721.jpg

Time to get hands on with the Epic, Scarlett, and Dragon. Maximise the potential and control the look.

The course was neatly broken down into camera setup and operation, shooting, workflow, some basic colour theory and post-production overviews. It began with operations from basic to advanced, the user interface (the menu often puts people off), shooting great images, testing the camera, tips and tricks, inside knowledge and info, ‘touch every button’ and camera builds. As the participants of the course were all introduced to one another in the first half hour it was clear that there was a broad spectrum of experience, professions and interest in the room. From high end stills photographers, their crew, facility company staff, filmmakers, RED owners, graduates, one stop shop small production companies, producers, and the likes of me – freelance camera operators, DoPs and directors from the world of Music Video, Fashion and Independent film, Broadcast and Corporate production.

From an operators perspective it was useful to go through some of the essential maintenance procedures such as cleaning the Sensor / OLPF (Optical Low Pass Filter) and also the most base level of setup – charging batteries, navigating the first level of the menu and optimising the fan settings and formatting your media. One key nugget of information here was to allow the camera to warm up for about 10-15 minutes before you begin shooting with it – and also before you calibrate the black shading of the camera. This is something that I would always do with any rental camera since you have no way of knowing how recently this was done with any hire.

Steve Johnson demonstrates changing the cameras OLPF.

Steve Johnson demonstrates changing the cameras OLPF.

The best thing about RED is the RAW workflow, but this workflow demands a specific approach and understanding of how to get the most out of it. It really depends on what you are producing for and how much time and consequently budget you will have in post to deal with your images. Second to that one cannot fail to mention the overall build quality – the cameras are not low cost but the high quality manufacture of the cameras and their constituent parts – the ‘ecosystem’ is considerable. The RED One is the system that started the Digital Cinema revolution and really made world class experienced Directors and Cinematographers believe that Digital Cinema cameras would and could soon offer greater latitude and dynamic range than traditional film stock. Now with many of the digital cameras out there we are at a point where digital cinema technology far exceeds the visual capability of what was previously achievable on film. But what is so different and special about RED? For those who are converted to it – it is like a religion, something for them to shout from the rooftops and evangelise over. I was keen to find out.

The strangest thing for me or anyone coming from a background of shooting with the correct White Balance in camera, the right ISO setting, perfect exposure and so on and so forth is to understand that with RED RAW you are not restricted to the settings that were on camera at the time of recording. With that in mind we were instructed to shoot by recording ‘as much light as necessary’, but not so much that we blow out highlights we wish to retain. This seemed to me an interesting point, but if I’m honest one that I typically follow whatever the digital camera system I am working with: More light = less noise. It is always far easier in post to scale information back a little than to bring up shadows that are underexposed – this will only ever introduce unwanted noise.

Where the RED comes into its own is the control in post over the ISO and especially FLUT. FLUT enables the DiT or post operator to very subtly change the ISO of an image in a non incremental way – unlike ISO which happens incrementally. This is extremely useful as you can overexpose by half a stop or more when shooting and then bring it back to a correctly exposed level in post. That way making sure we have the highlights texture and we do not have any area of the image with too little light that we can’t adjust. This is by far and away one of the most distinctive and advantageous points of the RED workflow. The exposure dynamics are extremely forgiving. This is perhaps one of the cameras strongest points but also I’d argue its weakest – I do feel that there might be an over-reliance on this latitude by over zealous operators. But, that’s just my opinion. Back to the course. In the afternoon of the first day we spend a good hour and a half shooting some camera tests. We looked at compression ratio setitngs and experimented with the various available frame dimensions, rates and ratios. This is another key point of RED above other systems (that is until Blackmagic Design just integrated compression ratio and RAW into their new UrsaMini camera… more on that in another post). The ability to set in camera the compression ratio used allows exceptional flexibility in the way that you can set the camera up depending on your final delivery and platform.

wpid-20150328_154427.jpg

Our Scarlett setup with standard 50mm prime for testing.

wpid-20150328_152531.jpg

Spotted these rushes (pun intended) and had to do a slow motion frame rate test with them.

The second day was headed up by the extremely talented and charismatic Dado Valentic, Dado clearly had passion and emotion for his work and it rubbed off on the participants whom all needed the energy after loosing an hours sleep to the British Summertime clock change. Dado covered lots of ground on the second day; colour science and theory, grading, DiT, workflow overviews, DaVinci Resolve and RED Cine-X. Now this is a lot to fit into a day of course you could spend weeks, months and certainly years learning these subjects but what Dado managed to do was to present complex technical, mathematical and artistic information in a way that was easy to understand for everyone in the room.  Dado took footage the groups had shot the previous day in the camera tests and took us through the Cine-X software and later into Resolve, having someone as talented as Dado really demonstrated how the flexibility of the system can be maximised to achieve really any look you want at the end of production. I was keen to learn the main workflows for handling the files and post with the .r3d files. These were standard and in a way for me self-explanatory but for sure if you are going to shoot on RED or any other RAW system then you better plan your post and workflow before you arrive on set. With the latest updates to Premiere Pro CC it’s possible to stay with the original .r3d files all the way through the pipeline from camera > edit > grade and this is truly exciting – though it will require the latest in hardware to make the process a smooth one.

I would definitely recommend the course for anyone who is interested in working with RED on either the camera or post side or like me both. I found it very informative, extremely professionally delivered and full of nuggets of information that will be applicable straight away shooting with any of RED’s cameras. The way in which learners were supported was great, as was the provision on equipment, the group sizes were not too big which meant hands on for lots of people. If you are going to work with RED and want a solid overview then this seems like the logical place to start. Finally, if you’re thinking of buying you receive a discount at the RED store for a week after the course and if that’s not enough to convince you, you’ll get a very cool large mousemat and a 16GB memory stick with the course literature and some RED reel test shots for colour grading – the ideal Weapon with which to practice.

Dado Valentic's masterful colour grading taken to the extreme.

Dado Valentic’s masterful colour grading taken to the extreme.

Advertisements